Recorder
- Support large capacity of S.D card
- Various types of displaying screen
- Alarm setup within each channel, support 4 contacts
- Multi inputs (thermo couple, RTD, and etc <17 kinds>)
- Communication: ETHERNET, USB, RS232, and RS485/422
| ● |
Power supply:100 - 240 V a.c 50/60 Hz |
| ● |
Voltage variable rate:+/- 10% of rated power supply |
| ● |
Power consumption:Max. 24 VA |
| ● |
Ambient temperature:0 ~ 50 °C |
| ● |
Ambient humidity:20 ~ 90 % RH(No condensation) |
| ● |
Vibration:Vibration width 1.2 mm Max(5 - 14 Hz) |
| ● |
Shock:None |
| ● |
Insulation resistance:Min 20 MΩ (500 V d.c between terminal and ground) |
| ● |
Dielectric strength:2500 V a.c 50/60 Hz for 1 minute |
| |
(Between 1st terminal and 2nd terminal, between 1st terminal and ground) |
| ● |
Thickness of panel:2 ~ 10 mm |
| ● |
Material:Case → SPC, Front case(Bezel) → ABS |
| ● |
External terminal:Bayonet mount type(available to separate when wiring) |
| ● |
Memory backup:Internal memory - Parameters are saved |
| |
|
Outer memory - Measuring value(SD card: 1GB, Approx. |
| |
|
1 year data can be saved when the record cycle is 2 seconds) |
| ● |
Weight:Approx 2.5 kg including packing box |
| ● |
Number of channel:6 channels or 12 channels |
| ● |
Input:Universal inputs(T/C 12 kinds, R.T.D 2 kinds, DC voltage 3 kinds) |
| ● |
Range setting:Set input type and range by front touch menu |
| ● |
Scale setting:Set Min. value, Max. value and unit by front touch menu |
| ● |
Accuracy:0.1% of maximum range |
| ● |
Measuring cycle:1 second |
| ● |
Accuracy of standard contact correction:Max. +/- 1.3 °C for T/C |
| ● |
Burn-out function:Detect disconnection of input signal for T/C and R.T.D |
| ● |
Input correction:Zero / Span or offset correction per channel |
| ● |
Allowable input signal resistance:T/C → Max. 250 Ω |
| |
|
d.c voltage → Max. 2 kΩ |
| |
|
R.T.D → Max. 10 Ω per wire |
| |
|
Note:resistance value of 3 wires should be equal) |
| ● |
Input impedance:T/C, R.T.D, DC input(mV) → Min. 10 MΩ. DC input(V d.c) → Min. 1 MΩ |
| ● |
Terminal:Bayonet mount type(available to separate when wiring) |
| ● |
Internal memory:Flash(Non-volatiles)-Setting parameter |
| ● |
External memory:SD-Card 1GB, Approx. 1 year data can be saved whe the record cycle is 2 seconds |
| ● |
File system:FAT 16/32 |
| ● |
Data save cycle:1 ~ 900 sec.(Max. 15 min.) |
| ● |
Save information:Measuring data, Message, Setting parameter, Alarm and cancellation |
| ● |
Save method:According to the indication screen's touch menu selection, content is saved from the internal |
| |
|
memory to the SD-CARD |
| ● |
Alarm setting:4 alarms per channel |
| ● |
Type of alarm:15 types |
| ● |
Alarm save selection:Start, stop or pass a data save function of recorder by alarm operation.
|
| ● |
Contact output:6 points or 12 points, Alarm, Burn-out, External contact input(D/I) |
| ● |
Indicator:TFT color LCD(113.28 mm x 84.71 mm), 320 x 234 Dots(18 bit color) |
| ● |
Type of color:Color of channel → 12 kinds |
| |
|
Color of background → Black or white selectable |
| ● |
Applicable language:English |
| ● |
Operating screen:Horizontal trend, vertical trend, text, bar graph |
| ● |
History screen:Display a past data in Horizontal / Vertical trend and text screen |
| ● |
Status-view display:Display alarm, digital input(D/I), relay operation, event-log and memory status. |
| ● |
Time axis setting:1 ~ 120 min.(Moving time between scale. m/div) |
| ● |
Display cycle:According to time axis setting(Min. time 1 sec.) |
| ● |
Screen-protection function:When no regulated time exists for screen manipulation, the backlight turns off |
| |
|
|
and goes into screen-protection mode. The screen is restored when touched. |
