| Appearance |
AX4 |
AX3 |
AX7 |
AX2 |
AX9 |
|
|
|
|
|
|
| Dimension(mm) |
48 x 48 x 63 |
96 x 48 x 63 |
72 x 72 x 63 |
48 x 96 x 63 |
96 x 96 x 63 |
| Input type |
Multi input (thermocouple : K, J, IEC 584-1), (RTD: Pt 100 �꽗, EIC751) |
| Sampling cycle |
100 ms |
| Input impedance |
max 1 MΩ |
Allowable input
wiring resistance |
max 10 �꽗 / 1wire (RTD). But resistance among 3 wires must be same. |
Allowable input
voltage |
10 V d.c |
| Display accuacy |
± 0.3 % of F.S |
| Display type |
7 Segment LED (PV : red, SV : green) |
| Font Size |
PV |
13.0x6.5 |
15.9x7.6 |
14.5x7.0 |
14.5x7.0 |
22.5x11.2 |
| SV |
9.2x5.2 |
12.0x6.0 |
9.4x4.7 |
10.8x5.2 |
18.7x9.3 |
| Input resolving power |
| �Thermocouple : 0.1 ℃ (TC-K2, TC-J), 0.5 ℃ (TC-K1) |
| � RTD : 0.03 ℃, (0.1 F) |
|
| Insulation resistance |
min 20 MΩ, 500 V d.c for 1 minute (primary terminal-secondary terminal) |
| Dielectric strength |
2300 V a.c 50/60 Hz, for 1 min (primary terminal-secondary terminal)
|
| Control method |
PID control by Auto - Tuning, ON / OFF control. |
| Manual reset |
Users set within the range 0.0 % ~ 100.0 % |
| Control output operation |
Reverse operation / Direct operation selectable by the parameter setting |
| Control output |
| � Relay output :1a contact, 3A 240 V a.c, 3 A 30 V d.c (resistive load) |
� Voltage pulse output for running SSR [time sharing proportional control (CYC)]
� Voltage pulse output for running SSR [phase control (PHR)]
0/12 V d.c, pulse voltage (resistive load minimum 600 Ω) |
|
Power supply
voltage |
100 - 240 V a.c 50/60 Hz |
| Voltage fluctuation |
± 10 % of the power supply voltage |
| Power consumption |
5.5 VA max |
| Ambient temperature |
-5 ~ 50 ℃ |
| Ambient humidity |
35 ~ 85 % R.H(but without dew condensation) |
| Vibration resistance |
10 - 550 �럯, 0.75 mm, each to direction X, Y and Z for 2 hours |
| Shock resistance |
300 �렓 to direction 6 each 3 times |
.jpg)
-
