TEMPERATURE AND HUMIDITY CONTROLLER
- 300 patterns (Total 6,000 segments).
- Color LCD screen (Touch panel type)
- Digital Input 8 contacts, Digital Outputs 20 contacts
- Communication (RS232 and RS485/422) standard installed
| Screen |
5.7 Inch Color STN - LCD Touch screen |
| Bias |
Temperature : -100.00 ~ 100.00 ˚C / Humidity : -100.0 ~ 100.0 (% R.H.) |
| Scaling |
When turn on power , free scaling set up |
| LPF |
2 ~ 180 sec. |
| Pattern |
300 patterns |
| Segment |
6,000 segments(100 segments are available in each pattern) |
| PID Group |
Temperature 16 zone + Humidity 16 zone |
| Auto Tuning Proportional Band (P) |
According to SV, AT is operating 0.00 ~ 100.00(%) (When proportional band is 0.00, ON/OFF control) |
| Integral Time (I) |
0.0 ~ 6,000 sec(0.00 OFF, I.D Time 0.00 > P control) |
| Derivative Time |
0.0 ~ 6,000 sec(0.00 OFF, I.D Time 0.00 > P control) |
| ON/OFF Control |
Proportional Band (P) is 0 |
| Direct / Reverse action |
Select Direct or Reverse action in control output |
| ON/OFF Hysteresis |
0.1 ~ 300.0 ˚C (in case of Humidity, Temperature of Humidity or conversion value) |
| Fuzzy |
Select ON/OFF |
| Retransmission output |
4 - 20 mA d.c 2 points(Temperature, Humidity) / Select PV / MV / SV |
| Alarm |
System alarm 8 points, 8 points for each pattern |
| Alarm type |
High - Low / Low deviation alarm etc 20 types of alarms |
| Alarm setting |
Process alarm |
Temperature : -100.00 ~ 200.00 ˚C, Humidity : 0.0 ~ 100.0 (%) |
| Deviation alarm |
Temperature : -300.00 ~ 300.00 ˚C, Humidity : -100.0 ~ 100.0 (%) |
| Hysteresis |
0.1 ~ 100.0 (%) |
| Memory for |
Internal Flash of SDRAM memory, Temperature - Humidity each |
Interruption of
electric power |
Memory type |
86,400 point |
| Memory function |
Program information & SV backup and restoration, Temperature - Humidity setting, PV save |
| Code# |
Suffix Code |
Description |
| TH500 |
 |
|
|
|
Temperature-Humidity Program Controller |
| Type |
N |
|
|
None |
| 1 |
|
|
| Standard Type |
| Sensor Input : |
Temperature(Pt100 Ω / 0-5 V d.c) |
| |
Humidity(Pt100 Ω / 0-5 V d.c) |
| Digital input(D.I) : |
8 point |
| Control Output : |
Temperature(SCR/SSR 1 point) |
| |
Humidity(SCR/SSR 1 point) |
| Retransmission : |
Temperature(4-20 mA d.c 1 point) |
| |
Humidity(4-40 mA d.c 1 point) |
| Contact Output : |
Relay(1a1b) 4 points |
| |
Relay(1a) 8 points |
| Transistor Output : |
Open collector 8 points |
| Communication : |
RS232C, RS485, USB |
|
| 2 |
|
|
| Additional Type |
| Sensor Input : |
Temperature(Pt100 Ω / 0-5 V d.c) |
| |
Humidity(Pt100 Ω / 0-5 V d.c) |
| Retransmission : |
Temperature(4-20 mA d.c 1 point) |
| |
Humidity(4-40 mA d.c 1 point) |
| Communication : |
RS232C, RS485, USB |
|
| Option |
N |
|
None |
| 1 |
|
| I/O Board 1 |
| SMPS(24 V d.c, 18W) + D.I 8 points + Relay(1a1b:4+1a:8) 12 points |
|
| 2 |
|
|
| 3 |
|
| I/O Board 3 Relay(1a1b) 8 points |
| I/O Board 1 + I/O Board 2 |
|
| 4 |
|
| SMPS(24 V d.c, 18W) + D.I 8 points + Relay(1a1b:4+1a:8) 12 points |
| 12 points + O.C 8 points |
| I/O Board 1 + I/O Board 3 |
|
| 5 |
|
| SMPS(24 V d.c, 18W) + D.I 8 points + Relay(1a1b:4+1a:8) 12 points |
| 12 points + Relay(1a1b) 8 points |
|
| Communication |
N |
None |
| 1 |
|
| * There is no option for the Standard type |
