Jumo เครื่องควบคุมอุณหภูมิแบบดิจิตอล DIGITAL TEMPERATURE CONTROLLER

The Jumo dTRON series temperature controller has supply voltage ranging from 110VAC to 240VAC. This controller has a width of 96mm and a height of 96mm(1/4 DIN) device. It has a single analogue input, two relays and two logic inputs or two logic outputs. This is robust equipment that includes 4, freely programmable devices in different DIN formats for controlling temperature, pressure and other process variables. The instruments can be used as 2-state, 3-state, modulating or continuous controllers. The electrical connection at the back is established via screw terminals.

Inclusions:

Controller, seal, fastening elements, operating instructions.

Features and Benefits

2 self-optimisation processes

2 timer functions

4 limit comparators

4 programmable set points, 2 parameter sets

Bright LCD display for viewing different process parameters

Freely programmable controller structures (2-point and 3-point step controllers and continuous-action controller)

Maximum 2, freely programmable analogue inputs

Minimum sampling time is 50ms

Profibus DP interface

Program function with 8 sections or ramp function

Programmable as a differential, humidity or ratio controller

Quick and user-friendly configuration via set-up program

RS422/485 interface

Tried-and-tested, clearly laid-out operating and configuration diagram

Up to 8 binary outputs

Jumo dTRON316 PID Temperature Controller, 48 x 48 (1/16 DIN)mm 1 (Analogue) Input, 1 Output Analogue, 110 → 240 V

Jumo Temperature Controller

The Jumo dTRON series temperature controller has supply voltage ranging from 110VAC to 240VAC. This controller has a width of 48mm and a height of 48mm(1/16 DIN) device. It has a single analogue input, two relays and two logic inputs or two logic outputs. This device gives 2 analogue outputs. This is robust equipment that includes 4, freely programmable devices in different DIN formats for controlling temperature, pressure and other process variables. The instruments can be used as 2-state, 3-state, modulating or continuous controllers. The electrical connection at the back is established via screw terminals.

Inclusions:

Controller, seal, fastening elements, operating instructions.

Features and Benefits

2 self-optimisation processes

2 timer functions

4 limit comparators

4 programmable set points, 2 parameter sets

Bright LCD display for viewing different process parameters

Freely programmable controller structures (2-point and 3-point step controllers and continuous-action controller)

Maximum 2 freely programmable analogue inputs

Minimum sampling time is 50ms

Profibus DP interface

Program function with 8 sections or ramp function

Programmable as a differential, humidity or ratio controller

Quick and user-friendly configuration via set-up program

RS422/485 interface

Tried-and-tested, clearly laid-out operating and configuration diagram

Up to 8 binary outputs

Jumo QUANTROL LC300 PID Temperature Controller, 96 x 96mm, 2 Output Analogue, 110 → 240 V ac Supply Voltage

Quantrol LC300 - PID Controller

The Jumo Quantrol is a compact, easy to use, and self-optimizing controller series.

The controller is used for two-state and three-state control applications as well as for the control of regulating valves or SCR power controllers via a continuous controller output.

The universal analog input is for RTD temperature probes, thermocouples, or current / voltage signals and can be programmed by the user.

3 formats: 48x48mm, 48x96mm and 96x96mm

Two seven-segment LED displays (red/green)

The values can be displayed in °C or °F

LED status indicator for the output

Two-state/three-state and continuous controller (depending on version)

Sensor monitoring

Self-optimization (autotuning) for exact PID control

Manual/automatic mode

Configurable limit value monitoring (alarms)

Setpoint changeover

Level inhibit and key lock

RS485 interface (Modbus RTU)

Ramp and timer function

Firing curve for pottery kilns

Push-in controller insert

Setup interface (USB Mini-B)

Jumo miroTRON Panel Mount Controller, 69 x 62 x 36mm 2 (1Pt100, 1 DI) Input, 2 Output Relay, 12 → 24 V dc Supply

The Jumo Electronic thermostat is available with PID two state controller function. The electronic thermostat can be used as a heating or cooling thermostat or optionally as a PID two state controller. This device has terminal blocks with PUSH IN technology enable fast electrical installation. The operation, parameterization and configuration are carried out via a membrane keyboard with four keys. The setup program on a PC allows the devices to be configured without any problems. No separate voltage supply is required when configuring via the USB interface.

Up to 4 relay outputs

Integrated timer function

Limit value monitoring function

Service and operating hours counter

Two state controller with auto tuning

High quality display and intuitive operation

Jumo diraTRON116 Panel Mount PID Temperature Controller, 48 x 48mm 3 Input, 3 Output 2 Relay, 1 Logic, 20 → 30 V

Fixed value or program controller

2 parameter blocks

Autotuning

Setpoint changeover (4 setpoint values)

Ramp function

Timer function

4 limit value monitoring functions

Service counter

Individual operator level

Separate application using structured text (ST code, option)

Math and logic function (option)

Fast wiring through PUSH IN technology

RS485 interface (option)

Additional analog and digital inputs via RS485 interface

Applications

Control of temperatures, pressures, and other process variables

Jumo diraVIEW104 Digital Indicator

Min/max value memory and display

Hold function

Taring function for weighing applications

Customer-specific linearization (40 value pairs or polynomial)

Timer function

4 limit value monitoring functions

Individual user level

Separate application using structured text (ST code, optional)

Math and logic function (optional)

Fast wiring through PUSH IN technology

Analog output (optional)

RS485 interface (optional)

Additional analog and digital inputs via RS485 interface

Application

Display of temperatures, pressures, and other process variables

« Back