| Fluke 110 Series
|
Specifications |
General Specifications |
AC Amps * |
Range: 3.00A to 10.00A Accuracy: ± (1.5% of reading plus 3 counts) Not specified below 3A Crest Factor: £3 AC Response: 50 Hz to 500 Hz
|
DC Amps * |
Range: 0.001A to 10.00A (20A overload for 30 seconds) Accuracy:± (1.0% of reading plus 3 counts) |
AC Volts |
Range: 300 mV to 600.0V rms Accuracy: ± (1.0% of reading plus 3 counts) AC Response: 50 Hz to 500 Hz |
DC Volts |
Range: 1 mV to 600.0V Accuracy: ± (0.7% of reading plus 2 counts) |
Ohms |
Range: 0.1W to 40.00 MW Best Accuracy: ± (0.9% of reading plus 1 count) |
Capacitance |
Range: 1 nF to 9999 µF Best Accuracy: ± (1.9% of reading plus 2 counts) |
Continuity |
Beeper guaranteed on <20W, guaranteed off >250W; detects opens or shorts of 250 µs or longer |
Frequency |
Range: Voltage Input - 5 Hz to 50 kHz Current Input - 50 Hz to 5 kHz (111 and 112 only) Accuracy: ± (0.1% of reading plus 2 counts) |
Note |
The 110 Series is not recommended for use with AC current clamps. 170 and 180 series DMMs are recommended for use with AC clamp accessories. | |